9/125 fibre cables provide a low cost option for gigabit ethernet network applications. Plenum fire rated fiber cables are used when in wall or air plenum runs are required without running the fiber through conduit. The ST jumper connector provides a twist-lock mechanism and the FC connector is a threaded to ensure connection reliability. Each cable is tested for optical integrity and loss prior to packaging to ensure proper data transmission. The durable rubber boots protects against damage typical in busy data racks and each end is properly labelled for easy identification.
Connector 1: | FC Male |
Connector 2: | ST Male |
Color: | Yellow |
Length: | 1 Meter (3.3 Feet) |
Strand Count: | Simplex (1-Strand) |
Core/Cladding Diameter: | Single Mode 9/125 |
Jacketing: | Plenum Fire Rated |
Attenuation: | 1310 nm: 0.25 dB/km or at 1550 nm: 0.35 dB/km |
Color | Yellow |
---|---|
Warranty | 90 Day (Limited) |
Attenuation | 1310 nm: 0.25 dB/km or at 1550 nm: 0.35 dB/km |
Cable Diameter | 1.8mm |
Compliance | RoHS / ELV |
Environment | Operating Temperature: -20°C to +70°C |
Connectors | ST to FC |
Fiber Core | 9/125 Singlemode Plenum |
Jacketing | Plenum Rated (OFNP) |
Fiber Type | Simplex |
Length (Meters) | 5m |
Polarity | Type A to B Crossover (Most Common for Duplex Patch Cords) |
Standards | Attenuation tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 |
Safety Certifications | Class 1 Laser, LN #50 7/2001, TUV, UL / FDA, 21CFR 1040.10 |